Lamp Ballast (Tridonic) for Gx42

The Colortrac Gx42 lamp ballast provides the high voltage needed for the fluorescent lamps.

If the lamps are not lighting up:

1. Check the lamps. Do they have light at the ends? Do they look burned at the ends? Then, you probably need new lamps. Go to: 28CT50E144A: GX42 Fluorescent Lamp
2. Check the ballast connections. Sometimes the wires are not making good contact. Reconnect the wires and make sure that they are secure.
3. Check the voltages going to and from the ballast. If the voltages coming into the ballast are okay. Replace the ballast.

WARNING: THE BALLAST GENERATES HIGH VOLTAGES THAT CAN KILL. DO NOT ATTEMPT TO WORK ON THE SCANNER WHILE IT IS PLUGGED INTO A POWER SOURCE!

If you need more information, you can contact us at: support@paradigmimaging.com

NOTE: This part has been discontinued by the manufacturer and quantities are limited to stock on hand. Availability can change without notice.

NOTE: The Gx and Gx+ (non-2011) scanners have reached their end of life and are no longer supported by the manufacturer. Parts for these scanners are limited to the stock on hand and are no longer available from the manufacturer. Sometimes we get some used parts. Used parts will be noted as used.