Paradigm Imaging Group: New Products - CS500 and CS510 Scanners

Board: CIS Controller Board for Graphtec IS210, CS510 and CS610

Mon, 14 Sep 2015 16:58:05 +0000

CIS Controller Board for Graphtec IS210, CS510 and CS610 scanners. Each CIS Sensor plugs into a CIS Controller Board. The CIS Controller Board sits beneath the CIS Sensor.

The 42" scanners have 5 CIS Controller Boards. The 24" scanners have 3 CIS Controller Boards. The boards can be rep..

Price: $510.00

Board: Ethernet Connection Board for IS200, CS500 CS600 Non-A

Wed, 05 Aug 2015 21:07:10 +0000

This is the network connection board for Graphtec IS200, CS500 and CS600 non-A version scanners.

Check the end of the scanner with the USB and network connections. If the USB connection is below the network connection then this is the correct board for the scanner.

This board is..

Price: $153.24

Graphtec Scanner Stand Caster with Brake

Wed, 15 Apr 2015 11:09:25 +0000

This caster fits most Graphtec scanner stands. It fits the IS200, IS210, CS500, CS510, CS600 and CS610 scanner stands. It may fit other Graphtec scanner stands. Although, it may be the wrong color.

The caster has a 50mm (1-7/8") diameter wheel with a brake. The stem has an 8mm thread wi..

Price: $9.95

Lint Free Cloth Wipes, 23x23cm (9x9in), 150 pack

Tue, 14 Apr 2015 10:25:05 +0000

Lint free cloth wipes for general cleaning of scanners and printers. These are a Polyester Knit that has been heat sealed on the edges to provide lint free cleaning.

The wipes are 23x23cm, or about 9x9 inches. This is a 150 pack.

Price: $47.70

Board: CIS Power Board for IS200A, CS500A, CS600A, IS210, CS510 & CS610 Scanners

Mon, 02 Mar 2015 15:06:08 +0000

The CIS Power Board takes in power from the power supply and distributes it to the other boards and sensors in the scanner.

Note that there are two versions of this board: The A-version and the non-A-version.

This is the A-version of the board. For the non-A-version, see Price: $526.00

Board: CIS Power Board for IS200, CS500 and CS600

Mon, 02 Mar 2015 14:58:12 +0000

The CIS Power Board takes in power from the power supply and distributes it to the other boards and sensors in the scanner.

Note that there are two versions of this board: The A-version and the non-A-version.

This is the non-A-version of the board. For the A-version, see Price: $514.06

Graphtec Scanning Software and Drivers Upgrade

Wed, 25 Feb 2015 16:05:37 +0000

This is a downloadable file containing user manuals, drivers and scanning software for all Graphtec scanners. You are not ordering a CD and will not get a CD. The file supports all USB Graphtec scanners on PCs up through Windows 7 (32bit and 64bit). Graphtec sc..

Price: $49.95

CIS Sensor Assembly, Rank B

Thu, 18 Dec 2014 12:23:42 +0000

CIS Sensor Assembly, Rank B for Graphtec 42" scanners. Each scanner has 5 CIS sensors which can be replaced individually.

In order to avoid color balance issues, Graphtec ranks the sensors that go into each scanner. All the sensors in a scanner should be the same rank. There is a sticke..

Price: $450.69

Roller: Pinch Roller Rubber O-Ring for IS & CS Scanners (pkg of 26)

Thu, 02 Oct 2014 22:29:53 +0000

Rubber O-ring that forms the pinch roller for the Graphtec IS200, IS210, CS500, CS510, CS600 and CS610 42" large format scanners.

Each 42" scanner has 208 O-rings. Note that this is the rubber O-ring only. It does not include the white hub of the pinch roller.

Sold in packs of 2..

Price: $10.00

Calibration: Graphtec 42" Color Scanner Calibration Set

Wed, 01 Oct 2014 21:15:04 +0000

Calibration set for the Graphtec IS200-PRO, IS210-PRO, CS500 and CS510 42" color scanners. Consists of a blank, white calibration sheet and a paper color correction target.

The